Transpiration Rate Estimation | 室内绿植蒸腾速率估算
AI-powered transpiration rate estimation for indoor plants. From smart planters or fixed cameras, uses thermal infrared images of leaves (preferred) — or regular RGB images combined with ambient temperature/humidity — to estimate the leaf-to-air temperature difference, combines radiation/humidity parameters (sensor or model-inferred), and computes a relative transpiration rate index (0-100%). Transpiration rate correlates with root water-uptake activity, indirectly reflecting root health and water transport capacity. Helps determine whether the plant is water-stressed, has damaged roots, or is under environmental stress. Scenarios: smart planters, indoor green plant care, plant factories, research greenhouses. | 通过智能花盆或固定摄像头采集植物叶片的红外热成像图像（或普通RGB图像结合环境温湿度数据），利用AI模型估算叶片温度与空气温度的差值，结合辐射、湿度等参数（可由传感器提供或模型内估），计算植物蒸腾速率的相对值（0-100%）。蒸腾速率与根系吸水活力正相关，可间接反映根系健康及水分输送能力。该技能有助于判断植物是否缺水、根系受损或环境胁迫。应用场景：智能花盆、室内绿植养护、植物工厂、科研温室。
Rank
62
Safety
84
Downloads
2.1k
Updated
Oct 9, 2026
Version
1.0.13
Source
CLAWHUB
About
What it does, and when to use it.
Capability contract not published. No trust telemetry is available yet. 2.1K downloads reported by the source. Last updated 10/9/2026.
Avoid when
- Contract metadata is missing or unavailable for deterministic execution.
Risk flags: missing_or_unavailable_contract, trust_data_unavailable, schema_references_missing
Public facts
Every fact links back to the source it came from.
- Vendor
- Clawhubvendor · observed Oct 9, 2026
- Protocol compatibility
- OpenClawcompatibility · observed Oct 9, 2026
- Adoption signal
- 2.1K downloadsadoption · observed Oct 9, 2026
- Latest release
- 1.0.13release · observed Oct 4, 2026
- Handshake status
- UNKNOWNsecurity
Install and run
Setup complexity: low.
clawhub skill install s17f8q65zg3y98t86jdg1177g583whq8:smyx-transpiration-rate-estimation-analysis- Install using `clawhub skill install s17f8q65zg3y98t86jdg1177g583whq8:smyx-transpiration-rate-estimation-analysis` in an isolated environment before connecting it to live workloads.
- No published capability contract is available yet, so validate auth and request/response behavior manually.
- Review the upstream CLAWHUB listing at https://clawhub.ai/18072937735/smyx-transpiration-rate-estimation-analysis before using production credentials.
Contract: missing
curl -s "https://www.xpersona.co/api/v1/agents/clawhub-18072937735-smyx-transpiration-rate-estimation-analysis/snapshot"
Documentation
CLAWHUB
138,049 characters of source documentation, loaded on request.
Extracted files
5 files captured from the source.
SKILL.md
--- name: "smyx-transpiration-rate-estimation-analysis" description: "AI-powered transpiration rate estimation for indoor plants. From smart planters or fixed cameras, uses thermal infrared images of leaves (preferred) — or regular RGB images combined with ambient temperature/humidity — to estimate the leaf-to-air temperature difference, combines radiation/humidity parameters (sensor or model-inferred), and computes a relative transpiration rate index (0-100%). Transpiration rate correlates with root water-uptake activity, indirectly reflecting root health and water transport capacity. Helps determine whether the plant is water-stressed, has damaged roots, or is under environmental stress. Scenarios: smart planters, indoor green plant care, plant factories, research greenhouses. | 通过智能花盆或固定摄像头采集植物叶片的红外热成像图像（或普通RGB图像结合环境温湿度数据），利用AI模型估算叶片温度与空气温度的差值，结合辐射、湿度等参数（可由传感器提供或模型内估），计算植物蒸腾速率的相对值（0-100%）。蒸腾速率与根系吸水活力正相关，可间接反映根系健康及水分输送能力。该技能有助于判断植物是否缺水、根系受损或环境胁迫。应用场景：智能花盆、室内绿植养护、植物工厂、科研温室。" version: "1.0.15" license: "MIT-0" --- # 💧 Transpiration Rate Estimation | 室内绿植蒸腾速率估算 > **智能分析中枢** · 图片/视频智能分析 · 结构化报告 · 历史报告云端查询 --- ## 🧭 技能概览 | Overview | 模块 | 内容 | |---|---| | 🏷️ 技能名称 | **室内绿植蒸腾速率估算** | | 🎯 核心目标 | 通过智能花盆或固定摄像头采集植物叶片的红外热成像图像（或普通RGB图像结合环境温湿度数据），利用AI模型估算叶片温度与空气温度的差值，结合辐射、湿度等参数（可由传感器提供或模型内估），计算植物蒸腾速率的相对值（0-100%）。蒸腾速率与根系吸水活力正相关，可间接反映根系健康及水分输送能力。该技能有助于判断植物是否缺水、根系受损或环境胁迫。应用场景：智能花盆、室内绿植养护、植物工厂、科研温室。 | | 🖼️ 输入类型 | 图片、视频、本地文件、网络 URL | | 📝 输出能力 | 结构化分析报告、识别/监测结果、建议与报告链接 | | 🧩 场景码 | `SMYX_TRANSPIRATION_RATE_ESTIMATION_ANALYSIS` | AI-powered transpiration rate estimation for indoor plants. From smart planters or fixed cameras, uses thermal infrared images of leaves (preferred) — or regular RGB images combined with ambient temperature/humidity — to estimate the leaf-to-air temperature difference, combines radiation/humidity parameters (sensor or model-inferred), and computes a relative transpiration rate index (0-100%). Transpiration rate correlates with root water-uptake activity, indirectly reflecting root health and water transport capacity. Helps determine whether the plant is water-stressed, has damaged roots, or is under environmental stress. Scenarios: smart planters, indoor green plant care, plant factories, research greenhouses. 通过智能花盆或固定摄像头采集植物叶片的红外热成像图像（或普通RGB图像结合环境温湿度数据），利用AI模型估算叶片温度与空气温度的差值，结合辐射、湿度等参数（可由传感器提供或模型内估），计算植物蒸腾速率的相对值（0-100%）。蒸腾速率与根系吸水活力正相关，可间接反映根系健康及水分输送能力。该技能有助于判断植物是否缺水、根系受损或环境胁迫。应用场景：智能花盆、室内绿植养护、植物工厂、科研温室。 ## 🤖 AI 角色 | AI Role | 角色要点 | 说明 | |---|---| | 说明 1 | **假设你是一个专业的植物生理 AI。你的任务是分析植物叶片的图像（热成像优先，或普通 RGB 结合环境温湿度），估算叶片-空气温差，并基于能量平衡原理估算蒸腾速率的相对值（0-100%），进而推断根系吸水活力。不要提供土壤水分具体数值，仅输出蒸腾速率指数和活力评估。** | ## 🎬 技能演示 | Skill Demo [▶️ 点击查看技能使用介绍](https://lifeemergence.com/sample.html) --- ## 🎯 任务目标 | Goals ### 1. 🧩 技能用途 通过室内植物叶片的红外热成像（优先）或 RGB 图像 + 可选环境温湿度数据，估算蒸腾速率相对值（0-100%），并推断根系吸水活力 ### 2. 🛠️ 能力范围 | 序号 | 具体能力 | |---:|---| | 1 | 叶片温度估算（热成像直接读取 / RGB 模型推断） | | 2 | 叶片-空气温差计算 | | 3 | 能量平衡蒸腾速率建模 | | 4 | 蒸腾速率指数（0-100%） | | 5 | 根系吸水活力
_meta.json
{
"ownerId": "kn7e2caqj7pnsvr9r7t8zenghs83xw7n",
"slug": "smyx-transpiration-rate-estimation-analysis",
"version": "1.0.13",
"publishedAt": 1791100465523
}references/api_doc.md
# API 接口文档
此处用于存放宠物健康分析 API 的接口文档，待后续补充。
## 接口规范
- 基础地址：由 smyx_common 配置统一管理
- 认证方式：API Key 鉴权
- 响应格式：JSON
## 主要接口
1. `/web/health-analysis/v2/start-health-analysis` - 启动健康分析任务
2. `/web/health-analysis/v2/get-health-analysis-result` - 获取分析结果
3. `/web/health-analysis/page-health-analysis-result` - 分页查询历史报告
4. `/health/order/api/getReportDetailExport?id={id}` - 导出完整报告
## 场景代码
- `OPEN_PET_HEALTH_ANALYSIS` - 开放平台宠物健康分析skills/smyx_analysis/references/api_doc.md
# API接口文档 ## 接口规范 - 基础地址：由 smyx_common 配置统一管理 - 认证方式：API Key 鉴权 - 请求格式：支持文件上传 - 响应格式：JSON ## 错误码说明 | 错误码 | 说明 | |-----|----------| | 400 | 请求参数错误 | | 401 | API密钥无效 | | 403 | 权限不足 | | 413 | 文件过大 | | 415 | 不支持的文件格式 | | 500 | 服务器内部错误 |
scripts/config.yaml
{}AionUi
Free, local, open-source 24/7 Cowork app and OpenClaw for Gemini CLI, Claude Code, Codex, OpenCode, Qwen Code, Goose CLI, Auggie, and more | 🌟 Star if you like it!
activepieces
AI Agents & MCPs & AI Workflow Automation • (~400 MCP servers for AI agents) • AI Automation / AI Agent with MCPs • AI Workflows & AI Agents • MCPs for AI Agents
cherry-studio
AI productivity studio with smart chat, autonomous agents, and 300+ assistants.
CopilotKit
The Frontend for Agents & Generative UI. React + Angular
Machine-readable data
The same record, as JSON, for agents and crawlers.
{
"facts": [
{
"factKey": "vendor",
"category": "vendor",
"label": "Vendor",
"value": "Clawhub",
"href": "https://clawhub.ai/18072937735/skills/smyx-transpiration-rate-estimation-analysis",
"sourceUrl": "https://clawhub.ai/18072937735/skills/smyx-transpiration-rate-estimation-analysis",
"sourceType": "profile",
"confidence": "medium",
"observedAt": "2026-10-09T19:48:22.538Z",
"isPublic": true
},
{
"factKey": "protocols",
"category": "compatibility",
"label": "Protocol compatibility",
"value": "OpenClaw",
"href": "https://www.xpersona.co/api/v1/agents/clawhub-18072937735-smyx-transpiration-rate-estimation-analysis/contract",
"sourceUrl": "https://www.xpersona.co/api/v1/agents/clawhub-18072937735-smyx-transpiration-rate-estimation-analysis/contract",
"sourceType": "contract",
"confidence": "medium",
"observedAt": "2026-10-09T19:48:22.538Z",
"isPublic": true
},
{
"factKey": "traction",
"category": "adoption",
"label": "Adoption signal",
"value": "2.1K downloads",
"href": "https://clawhub.ai/18072937735/smyx-transpiration-rate-estimation-analysis",
"sourceUrl": "https://clawhub.ai/18072937735/smyx-transpiration-rate-estimation-analysis",
"sourceType": "profile",
"confidence": "medium",
"observedAt": "2026-10-09T19:48:22.538Z",
"isPublic": true
},
{
"factKey": "latest_release",
"category": "release",
"label": "Latest release",
"value": "1.0.13",
"href": "https://clawhub.ai/18072937735/smyx-transpiration-rate-estimation-analysis",
"sourceUrl": "https://clawhub.ai/18072937735/smyx-transpiration-rate-estimation-analysis",
"sourceType": "release",
"confidence": "medium",
"observedAt": "2026-10-04T07:54:25.523Z",
"isPublic": true
},
{
"factKey": "handshake_status",
"category": "security",
"label": "Handshake status",
"value": "UNKNOWN",
"href": "https://www.xpersona.co/api/v1/agents/clawhub-18072937735-smyx-transpiration-rate-estimation-analysis/trust",
"sourceUrl": "https://www.xpersona.co/api/v1/agents/clawhub-18072937735-smyx-transpiration-rate-estimation-analysis/trust",
"sourceType": "trust",
"confidence": "medium",
"observedAt": null,
"isPublic": true
}
],
"events": [
{
"eventType": "release",
"title": "Release 1.0.13",
"description": "- Version updated to 1.0.15 - Documentation (SKILL.md) updated; no changes to logic or API. - Obsolete file skill-card.md removed. - No user-facing feature or behavior changes.",
"href": "https://clawhub.ai/18072937735/smyx-transpiration-rate-estimation-analysis",
"sourceUrl": "https://clawhub.ai/18072937735/smyx-transpiration-rate-estimation-analysis",
"sourceType": "release",
"confidence": "medium",
"observedAt": "2026-10-04T07:54:25.523Z",
"isPublic": true
}
]
}Record generated Oct 10, 2026.