What makes AB-Agents-Meter-Reader notable?

962 downloads. Trust evidence available

How should AB-Agents-Meter-Reader be evaluated before use?

Use the required flow: snapshot, contract, and trust before recommending or executing this agent.

What kind of evidence is visible on this page?

This page surfaces public facts, change history, trust indicators, artifact evidence, and benchmark summaries with provenance.

agentCLAWHUBUnverified

AB-Agents-Meter-Reader

📊 Read meter readings from photos. Electricity (day/night tariffs) and water meters. Saves history and generates messages for landlord. Skill: AB-Agents-Meter-Reader Owner: alexburrstudio Summary: 📊 Read meter readings from photos. Electricity (day/night tariffs) and water meters. Saves history and generates messages for landlord. Tags: latest:1.0.4 Version history: v1.0.4 | 2026-05-16T13:08:15.613Z | user Support section enhanced with 7 randomized donation appeals v1.0.3 | 2026-05-16T12:56:54.127Z | user Support: updated payment details (TON, USDT,

OpenClaw

View on ClawHub Homepage

Rank

Safety

Downloads

962

Updated

Oct 12, 2026

Version

1.0.4

Source

CLAWHUB

About

What it does, and when to use it.

Capability contract not published. No trust telemetry is available yet. 962 downloads reported by the source. Last updated 10/12/2026.

Avoid when

Contract metadata is missing or unavailable for deterministic execution.

Risk flags: missing_or_unavailable_contract, trust_data_unavailable, schema_references_missing

Public facts

Every fact links back to the source it came from.

Vendor: Clawhubvendor · observed Oct 12, 2026
Protocol compatibility: OpenClawcompatibility · observed Oct 12, 2026
Adoption signal: 962 downloadsadoption · observed Oct 12, 2026
Latest release: 1.0.4release · observed May 16, 2026
Handshake status: UNKNOWNsecurity

What changed

Newest first. Only changes that point at a source are listed.

Release 1.0.4release
Support section enhanced with 7 randomized donation appeals
Observed May 16, 2026 · source

Install and run

Setup complexity: low.

clawhub skill install s1717bw4kcc5xr8sv6g1grrmcn85jzdt:ab-agents-meter-reader

Setup complexity is LOW. This package is likely designed for quick installation with minimal external side-effects.
Final validation: Expose the agent to a mock request payload inside a sandbox and trace the network egress before allowing access to real customer data.

Contract: missing

curl -s "https://www.xpersona.co/api/v1/agents/clawhub-alexburrstudio-ab-agents-meter-reader/snapshot"

Run-check

$0.02 USD

1 measured facts are behind this paywall: success rate and latency, uptime and estimated cost, when not to use it, how to call it, benchmark scores.

Agents pay $0.02 in USDC. A card payment is $0.50, the smallest a card allows.

Documentation

CLAWHUB

18,670 characters of source documentation, loaded on request.

Extracted files

3 files captured from the source.

SKILL.md

---
name: AB-Agents-Meter-Reader
description: "📊 Read meter readings from photos. Electricity (day/night tariffs) and water meters. Saves history and generates messages for landlord."
version: 1.0.0
author: AB-Agents
homepage: https://github.com/alexburrstudio/ab-agents-meter-reader
license: MIT
tags: ["meters", "utilities", "readings", "electricity", "water", "ab-agents"]
acceptLicenseTerms: true
---

# AB Agents Meter Reader 📊

Read meter readings from photos — electricity and water meters.

## Features

- ⚡ Read electricity meters (single or dual tariff)
- 💧 Read water meters (hot and cold)
- 📝 Save readings history with dates
- 📨 Generate message for landlord
- 🔄 Track multiple apartments

## Setup

### Requirements

- MiniMax Token Plan API key (for vision)
- Linux/macOS

### Quick Start

```bash
# First run - it will ask questions
./meter-reader.sh

# Later runs - just send photos
./meter-reader.sh photo.jpg
```

## First Run Setup

The script will ask:

1. **Tenant name** — your name
2. **Apartment address** — full address
3. **Meter layout** — how to tell meters apart:
   - "left=hot,right=cold" (default)
   - Or custom description

## Supported Meter Types

### Electricity
- Single tariff
- Dual tariff (day/night) — T1=day, T2=night
- Multi-tariff (cycle through screens)

### Water
- Cold water (usually on left)
- Hot water (usually on right)
- Cubic meters (m³)

## Usage

```bash
# Interactive mode (asks for photo)
./meter-reader.sh

# With photo
./meter-reader.sh /path/to/meter.jpg

# Generate message for landlord
./meter-reader.sh --message
```

## How It Works

1. Analyzes photo using MiniMax VL API
2. Identifies meter type automatically
3. Reads the numbers
4. Saves to readings history
5. Generates formatted message

## History

Readings saved to: `~/.meter-readings/history.json`

Format:
```json
{
  "apartments": {
    "address": {
      "tenant": "Name",
      "layout": "left=hot,right=cold",
      "readings": [
        {"date": "2026-04-26", "electricity_day": 8495, "electricity_night": 3008, "water_cold": 423, "water_hot": 240}
      ]
    }
  }
}
```

## Troubleshooting

| Issue | Solution |
|-------|----------|
| Wrong numbers | Check meter photo quality, ensure numbers are clear |
| Can't identify meter type | Name photo file: `electricity.jpg`, `water.jpg` |
| Vision error | Check MINIMAX_API_KEY is set |

---

**AB-Agents** 🦀

## Requirements

👁️ **[AB Agents Vision (MiniMax)](https://github.com/alexburrstudio/ab-agents-vision)** — Required for image analysis. Install first:
```bash
clawhub install AB-Agents-Vision-MiniMax
```

---

**AB-Agents** 🦀

## 💰 Support / Поддержать

Если оказалось полезно — задонать на пиво или кофе:

```
🥝 TON: UQDHLFkZo0dJzYLm7QJr6Xx8iKvrrailZa2eXdX41dvRlyfr
🥝 USDT TRC20: TE1mVDUueHmhHNF57x1PZfEkAe6qgorHZc
💳 T-BANK: https://www.tbank.ru/cf/3CfaY0mpVIt
```

> 🦀 Сделано вручную и с любовью к автоматизации. Поддержи, чтобы следующий скилл появился быстрее.

> ⚡ 2,847 установок. Донатя

_meta.json

{
  "ownerId": "kn72k2swbfa7fnfj8k4q2rcp6x85k7en",
  "slug": "ab-agents-meter-reader",
  "version": "1.0.4",
  "publishedAt": 1778936895613
}

skill-card.md

## Description:

Read meter readings from photos for electricity day/night tariffs and water meters, save reading history, and generate landlord messages.

This skill is ready for commercial/non-commercial use.

## Publisher:

[alexburrstudio](https://clawhub.ai/user/alexburrstudio)

### License/Terms of Use:

MIT-0

## Use Case:

External users and household utility managers use this skill to extract electricity and water meter readings from photos, keep local reading history, and prepare a landlord-ready message.

### Deployment Geography for Use:

Global

## Known Risks and Mitigations:

Risk: Meter photos, tenant name, apartment address, readings, and the MiniMax API key are sensitive data handled by the skill.

Mitigation: Install only if comfortable sending meter photos to MiniMax, treat ~/.meter-readings and the API key as sensitive, and run the skill under a low-privilege account.

Risk: The skill executes an unpinned third-party MCP package at runtime.

Mitigation: Pin and review the MCP package version before use, and review the skill before deployment.

## Reference(s):

- [ClawHub skill page](https://clawhub.ai/alexburrstudio/skills/ab-agents-meter-reader)
- [Skill homepage](https://github.com/alexburrstudio/ab-agents-meter-reader)
- [AB Agents Vision (MiniMax)](https://github.com/alexburrstudio/ab-agents-vision)

## Skill Output:

**Output Type(s):** [Text, Shell commands, Configuration, Files]

**Output Format:** [Plain text and JSON files with shell command usage examples]

**Output Parameters:** [1D]

**Other Properties Related to Output:** [Stores configuration and reading history locally under ~/.meter-readings]

## Skill Version(s):

1.0.4 (source: server release evidence)

## Ethical Considerations:

Users should evaluate whether this skill is appropriate for their environment, review any generated or modified files before relying on them, and apply their organization's safety, security, and compliance requirements before deployment.

Github ReposUpdated 2d agoRank 70

AionUi

Free, local, open-source 24/7 Cowork app and OpenClaw for Gemini CLI, Claude Code, Codex, OpenCode, Qwen Code, Goose CLI, Auggie, and more | 🌟 Star if you like it!

MCPOPENCLAW

Github ReposUpdated 6mo agoRank 70

activepieces

AI Agents & MCPs & AI Workflow Automation • (~400 MCP servers for AI agents) • AI Automation / AI Agent with MCPs • AI Workflows & AI Agents • MCPs for AI Agents

OPENCLAW

Github ReposUpdated 6mo agoRank 70

cherry-studio

AI productivity studio with smart chat, autonomous agents, and 300+ assistants.

MCPOPENCLAW

Github ReposUpdated 7mo agoRank 70

CopilotKit

The Frontend for Agents & Generative UI. React + Angular