What makes Shopee-店铺媒体空间 notable?

1K downloads. Trust evidence available

How should Shopee-店铺媒体空间 be evaluated before use?

Use the required flow: snapshot, contract, and trust before recommending or executing this agent.

What kind of evidence is visible on this page?

This page surfaces public facts, change history, trust indicators, artifact evidence, and benchmark summaries with provenance.

agentCLAWHUBUnverified

Shopee-店铺媒体空间

Shopee（虾皮）媒体上传 MediaSpace（与 linkfox-shopee-store-auth 同系列）。图片通过 /shopee/uploadMediaSpaceImage 专用端点上传；其余 MediaSpace JSON API 经 /shopee/developerProxy 转发。当用户提到 Shopee 上传图片、上传视频、media_space、upload_image、视频分片上传或获取 Shopee 图片 ID/URL 时触发。

OpenClaw

View on ClawHub Homepage

Rank

Safety

Downloads

1.0k

Updated

Oct 11, 2026

Version

1.0.6

Source

CLAWHUB

About

What it does, and when to use it.

Capability contract not published. No trust telemetry is available yet. 1K downloads reported by the source. Last updated 10/11/2026.

Avoid when

Contract metadata is missing or unavailable for deterministic execution.

Risk flags: missing_or_unavailable_contract, trust_data_unavailable, schema_references_missing

Public facts

Every fact links back to the source it came from.

Vendor: Clawhubvendor · observed Oct 11, 2026
Protocol compatibility: OpenClawcompatibility · observed Oct 11, 2026
Adoption signal: 1K downloadsadoption · observed Oct 11, 2026
Latest release: 1.0.6release · observed Sep 14, 2026
Handshake status: UNKNOWNsecurity

Install and run

Setup complexity: low.

clawhub skill install s171g8b6m2khwdy9ye8bxj0wx183vd4z:linkfox-shopee-store-media-space

Install using `clawhub skill install s171g8b6m2khwdy9ye8bxj0wx183vd4z:linkfox-shopee-store-media-space` in an isolated environment before connecting it to live workloads.
No published capability contract is available yet, so validate auth and request/response behavior manually.
Review the upstream CLAWHUB listing at https://clawhub.ai/linkfox-ai/linkfox-shopee-store-media-space before using production credentials.

Contract: missing

curl -s "https://www.xpersona.co/api/v1/agents/clawhub-linkfox-ai-linkfox-shopee-store-media-space/snapshot"

Run-check

$0.02 USD

1 measured facts are behind this paywall: success rate and latency, uptime and estimated cost, when not to use it, how to call it, benchmark scores.

Agents pay $0.02 in USDC. A card payment is $0.50, the smallest a card allows.

Documentation

CLAWHUB

107,787 characters of source documentation, loaded on request.

Extracted files

5 files captured from the source.

SKILL.md

---
name: linkfox-shopee-store-media-space
description: Shopee（虾皮）媒体上传 MediaSpace（与 linkfox-shopee-store-auth 同系列）。图片通过 /shopee/uploadMediaSpaceImage 专用端点上传；其余 MediaSpace JSON API 经 /shopee/developerProxy 转发。当用户提到 Shopee 上传图片、上传视频、media_space、upload_image、视频分片上传或获取 Shopee 图片 ID/URL 时触发。
---

# Shopee 媒体 MediaSpace

Shopee Open Platform **MediaSpace 模块**（6 个 API）。**依赖 `linkfox-shopee-store-auth`** 选店。图片上传走 **`POST /shopee/uploadMediaSpaceImage`**；其余 JSON API 经 **`POST /shopee/developerProxy`** 转发。服务端均按店铺读取 token。

## 调用方式

- **API 端点**：图片为 `POST /shopee/uploadMediaSpaceImage`；其余操作为 `POST /shopee/developerProxy`（完整参数/响应见 `references/api.md`）
- **Python 脚本**：`python scripts/media_space_api.py '<JSON 参数>' [--inline]`（可用脚本见上文脚本一览）
- **成本约束**：本工具会消耗算力；失败/空结果不得自动换关键词、翻页或连续试探；需要继续检索时先向用户说明会产生额外消耗。

**输出策略（脚本默认行为）**：
- **始终**将完整响应写入 `<cwd>/linkfox/<YYYY-MM-DD>/<session>/data/<skill-name>-<timestamp>.json`（`<cwd>` 为脚本执行时的工作目录，在 Claude Code 里即当前项目目录；`<session>` 取自环境变量 `SESSION_ID`，按用户任务自动聚合；**禁止写入 /tmp**，当前目录不可写则报错）
- 响应体 ≤ 8 KB：落盘后把完整 JSON 打印到 stdout
- 响应体 > 8 KB：落盘后 stdout 只输出摘要（顶层字段、常见计数如 `total`/`costToken`、最大列表字段的长度 + 前 3 条样本）
- 加 `--inline` 强制全量打印到 stdout（同样落盘）

**读数据建议**：先看摘要判断是否足够；需要具体字段时优先用 `jq`或`ConvertFrom-Json` 从保存的 json 文件按需抽取，避免整份 JSON 进入上下文。

## 解决认证和算力问题
发生以下异常情况时，采用 references/onboarding.md 引导解决问题：

### 异常情况
- **未配置API Key**：环境变量未配置 `LINKFOX_AGENT_API_KEY`，也未配置 `LINKFOXAGENT_API_KEY`。
- **响应401或402状态码**
- **响应提示算力或余额不足**：消息含"算力余额不足/计费不足/余额不足/quota exceeded/insufficient balance/套餐到期/需充值/请充值"，或类似含义的内容。

## 官方参考

MediaSpace 模块索引：[v2.media_space.init_video_upload](https://open.shopee.com/documents/v2/v2.media_space.init_video_upload?module=91&type=1)

---

## Prerequisites（必须先读）

1. 运行 `python scripts/check_auth_dependency.py`；exit code **42** → 先安装 **`linkfox-shopee-store-auth`** 并授权店铺。
2. **不要**在本 skill 内实现授权/令牌逻辑。

---

## Core Concepts

- **转发链路**：图片经专用上传端点，其余接口经 `developerProxy`；两条链路均由服务端按授权店铺注入 token，再经紫鸟 `shopee-proxy` 调用 Shopee API
- **图片上传**：`upload_image.py` 读取本地 JPEG/PNG/WebP，经专用端点上传，返回 Shopee `imageId`（供 `add_item` 使用）
- **视频分片上传**：`init_video_upload` → `upload_video_part`(×N) → `complete_video_upload` → `get_video_upload_result`
- **视频发布/管理** → `linkfox-shopee-store-video`（Video 模块，非上传）
- **商品 listing** 使用上传返回的 Shopee 图片 ID → `linkfox-shopee-store-product`

## 可用脚本（MediaSpace 模块 6 个 API）

| 脚本 | API | Method |
|------|-----|--------|
| `init_video_upload.py` | init_video_upload | POST |
| `upload_video_part.py` | upload_video_part | POST |
| `complete_video_upload.py` | complete_video_upload | POST |
| `get_video_upload_result.py` | get_video_upload_result | GET |
| `cancel_video_upload.py` | cancel_video_upload | POST |
| `upload_image.py` | upload_image | POST |
| `media_space_api.py` | 通用入口（JSON 含 `api` 字段） | — |

共享：`_shopee_media_space_common.py`、`_media_space_endpoints.py`、`_media_space_api_runner.py`。

## 接口说明（按 API）

入参与响应细节放在 `references/apis/`，SKILL 只保留索引。

| API | 说明文档 |
|-----|----------|
| `cancel_video_upload` | [refe

_meta.json

{
  "ownerId": "kn7dmc1t4j28hem1twwyav85p182pb1j",
  "slug": "linkfox-shopee-store-media-space",
  "version": "1.0.6",
  "publishedAt": 1789363740909
}

references/api.md

# linkfox-shopee-store-media-space — 参数与字段参考

> 单接口入参/响应说明已拆到 **`apis/`**（按 API 一份）；本文件保留模块总览与 Feedback。
Shopee **MediaSpace 模块**共 6 个 API。`upload_image` 经专用端点 **`POST /shopee/uploadMediaSpaceImage`** 上传；其余 API 经 **`POST /shopee/developerProxy`** 转发。

授权见 **`linkfox-shopee-store-auth`**。官方索引：[v2.media_space.init_video_upload](https://open.shopee.com/documents/v2/v2.media_space.init_video_upload?module=91&type=1)

## 通用约定

- **Base URL**：`https://tool-gateway.linkfox.com`
- **Method**：POST（网关），上游 Method 见各接口
- **Auth**：Header `Authorization: <api_key>`（`LINKFOXAGENT_API_KEY`）（如未配置 按 SKILL.md 的 **## 解决认证和算力问题** 处理）
- **流程**：授权选店后，图片调用 `/shopee/uploadMediaSpaceImage`；其余接口调用 `/shopee/developerProxy`。业务脚本不读取或传递 access token
- **图片上传**：`POST /shopee/uploadMediaSpaceImage`，传 `shopId`、`filePath`（脚本侧）
- **其余 API path**：经 developerProxy，须 `api/v2/media_space/...`
- **标识**：通常传 **`shopId`**
- **官方文档 URL 规则**：`https://open.shopee.com/documents/v2/v2.media_space.{api}?module=91&type=1`
- **上传类接口**：视频分片上传需按顺序 `init_video_upload` → `upload_video_part`(多次) → `complete_video_upload` → `get_video_upload_result`

---

## MediaSpace 模块总览

| # | API | Method | path | 脚本 | 官方文档 |
|---|-----|--------|------|------|----------|
| 1 | cancel_video_upload | POST | `api/v2/media_space/cancel_video_upload` | `cancel_video_upload.py` | [apis/cancel-video-upload.md](./apis/cancel-video-upload.md) |
| 2 | complete_video_upload | POST | `api/v2/media_space/complete_video_upload` | `complete_video_upload.py` | [apis/complete-video-upload.md](./apis/complete-video-upload.md) |
| 3 | get_video_upload_result | GET | `api/v2/media_space/get_video_upload_result` | `get_video_upload_result.py` | [apis/get-video-upload-result.md](./apis/get-video-upload-result.md) |
| 4 | init_video_upload | POST | `api/v2/media_space/init_video_upload` | `init_video_upload.py` | [apis/init-video-upload.md](./apis/init-video-upload.md) |
| 5 | upload_image | POST | `/shopee/uploadMediaSpaceImage` → `api/v2/media_space/upload_image` | `upload_image.py` | [apis/upload-image.md](./apis/upload-image.md) |
| 6 | upload_video_part | POST | `api/v2/media_space/upload_video_part` | `upload_video_part.py` | [apis/upload-video-part.md](./apis/upload-video-part.md) |
通用入口：`media_space_api.py`（JSON 含 `"api": "<上表 API 名>"`）。

---

## 接口说明

### 视频分片上传流程

| 步骤 | API | 说明 |
|------|-----|------|
| 1 | `init_video_upload` | 初始化上传，获取 upload_id 等 |
| 2 | `upload_video_part` | 上传各分片（可多次调用） |
| 3 | `complete_video_upload` | 完成上传 |
| 4 | `get_video_upload_result` | 查询上传结果/视频 URL |
| — | `cancel_video_upload` | 取消进行中的上传 |

### 图片上传

| API | 说明 |
|-----|------|
| `upload_image` | 上传图片，返回 Shopee 图片 ID/URL（`imageId` 可用于 add_item）— [apis/upload-image.md](./apis/upload-image.md) |

---

## 网关错误码

| errcode | 含义 | 建议 |
|---------|------|------|
| 1002 | 参数/未登录 | 检查 shopId 与 API Key |
| 1003 | 代理/网络异常 | 重试 |
| 1004 | 无授权记录 | auth skill |
| 1005 | path 未白名单 | 确认 `api/v2/media_space/...` |

---

## curl 示例

```bash
export KEY=$LINKFOX_

references/apis/cancel-video-upload.md

# cancel_video_upload

| 项 | 值 |
|----|-----|
| 脚本 | `scripts/cancel_video_upload.py` |
| Method / path | POST `api/v2/media_space/cancel_video_upload` |
| 官方文档 | [cancel_video_upload](https://open.shopee.com/documents/v2/v2.media_space.cancel_video_upload?module=91&type=1) |
| 用途 | Cancel in-progress video upload |

经 **`POST /shopee/developerProxy`** 转发；依赖 **`linkfox-shopee-store-auth`** 选店（通常传 `shopId` 或 `merchantId`）。

---

## 脚本 JSON 入参

| 字段 | 类型 | 必填 | 说明 |
|------|------|------|------|
| `shopId` | string | 与 `merchantId` 二选一 | 店铺 ID（推荐；Public 等无店铺接口可省略） |
| `merchantId` | string | 与 `shopId` 二选一 | 商户 ID |

- Method：**POST**
- POST：传 `body` / `requestBody`，或把 `body_fields` 列在 JSON 顶层
- `shopId` / `merchantId` / `skipDepCheck` 等为网关选店保留字段，不会进 Shopee query/body
- Registry notes：Cancel in-progress video upload

---

## 调用示例

```bash
export LINKFOXAGENT_API_KEY="<your-key>"

python scripts/cancel_video_upload.py '{"shopId": "67890"}'

# 通用入口
python scripts/media_space_api.py '{"api": "cancel_video_upload", "shopId": "67890"}'
```

---

## 响应要点

1. 先看 **`developerProxy.httpStatus`** / `errcode`
2. 再读 **`cancelVideoUpload`**（Shopee `response` 解析结果）
3. 字段以官方文档为准

references/apis/complete-video-upload.md

# complete_video_upload

| 项 | 值 |
|----|-----|
| 脚本 | `scripts/complete_video_upload.py` |
| Method / path | POST `api/v2/media_space/complete_video_upload` |
| 官方文档 | [complete_video_upload](https://open.shopee.com/documents/v2/v2.media_space.complete_video_upload?module=91&type=1) |
| 用途 | Complete video upload after all parts sent |

经 **`POST /shopee/developerProxy`** 转发；依赖 **`linkfox-shopee-store-auth`** 选店（通常传 `shopId` 或 `merchantId`）。

---

## 脚本 JSON 入参

| 字段 | 类型 | 必填 | 说明 |
|------|------|------|------|
| `shopId` | string | 与 `merchantId` 二选一 | 店铺 ID（推荐；Public 等无店铺接口可省略） |
| `merchantId` | string | 与 `shopId` 二选一 | 商户 ID |

- Method：**POST**
- POST：传 `body` / `requestBody`，或把 `body_fields` 列在 JSON 顶层
- `shopId` / `merchantId` / `skipDepCheck` 等为网关选店保留字段，不会进 Shopee query/body
- Registry notes：Complete video upload after all parts sent

---

## 调用示例

```bash
export LINKFOXAGENT_API_KEY="<your-key>"

python scripts/complete_video_upload.py '{"shopId": "67890"}'

# 通用入口
python scripts/media_space_api.py '{"api": "complete_video_upload", "shopId": "67890"}'
```

---

## 响应要点

1. 先看 **`developerProxy.httpStatus`** / `errcode`
2. 再读 **`completeVideoUpload`**（Shopee `response` 解析结果）
3. 字段以官方文档为准

Github ReposUpdated 2d agoRank 70

AionUi

Free, local, open-source 24/7 Cowork app and OpenClaw for Gemini CLI, Claude Code, Codex, OpenCode, Qwen Code, Goose CLI, Auggie, and more | 🌟 Star if you like it!

MCPOPENCLAW

Github ReposUpdated 6mo agoRank 70

activepieces

AI Agents & MCPs & AI Workflow Automation • (~400 MCP servers for AI agents) • AI Automation / AI Agent with MCPs • AI Workflows & AI Agents • MCPs for AI Agents

OPENCLAW

Github ReposUpdated 6mo agoRank 70

cherry-studio

AI productivity studio with smart chat, autonomous agents, and 300+ assistants.

MCPOPENCLAW

Github ReposUpdated 7mo agoRank 70

CopilotKit

The Frontend for Agents & Generative UI. React + Angular