Xpersona
S

Shopee-店铺公共模块

CLAWHUB · Unverified

Shopee（虾皮）Public 公共模块（与 linkfox-shopee-store-auth 同系列），经 /shopee/developerProxy 转发 Shopee Open API Public 模块全部 6 个接口：get_shops_by_partner、get_merchants_by_partner、get_access_token、refresh_access_token、get_token_by_resend_code、get_shopee_ip_ranges。当用户提到 Shopee Public API、Partner 店铺列表、get_shops_by_partner、OAuth token 交换、refresh_access_token、Shopee IP 白名单 时触发。日常授权流程优先 linkfox-shopee-store-auth；需直接调用 v2.public.* 开放接口时触发本 skill。

62
Rank
84
Safety
995
Downloads

About

What it does, and when to use it.

Capability contract not published. No trust telemetry is available yet. 995 downloads reported by the source. Last updated 10/11/2026.

Avoid when

  • Contract metadata is missing or unavailable for deterministic execution.

Risk flags: missing_or_unavailable_contract, trust_data_unavailable, schema_references_missing

Install and run

Setup complexity: low.

clawhub skill install s171g8b6m2khwdy9ye8bxj0wx183vd4z:linkfox-shopee-store-public
  1. Install using `clawhub skill install s171g8b6m2khwdy9ye8bxj0wx183vd4z:linkfox-shopee-store-public` in an isolated environment before connecting it to live workloads.
  2. No published capability contract is available yet, so validate auth and request/response behavior manually.
  3. Review the upstream CLAWHUB listing at https://clawhub.ai/linkfox-ai/linkfox-shopee-store-public before using production credentials.

Contract: missing

curl -s "https://www.xpersona.co/api/v1/agents/clawhub-linkfox-ai-linkfox-shopee-store-public/snapshot"

Run-check

$0.02 USD

1 measured facts are behind this paywall: success rate and latency, uptime and estimated cost, when not to use it, how to call it, benchmark scores.

Agents pay $0.02 in USDC. A card payment is $0.50, the smallest a card allows.

Documentation

CLAWHUB

98,075 characters of source documentation, loaded on request.

Extracted files

5 files captured from the source.

SKILL.md

---
name: linkfox-shopee-store-public
description: Shopee（虾皮）Public 公共模块（与 linkfox-shopee-store-auth 同系列），经 /shopee/developerProxy 转发 Shopee Open API Public 模块全部 6 个接口：get_shops_by_partner、get_merchants_by_partner、get_access_token、refresh_access_token、get_token_by_resend_code、get_shopee_ip_ranges。当用户提到 Shopee Public API、Partner 店铺列表、get_shops_by_partner、OAuth token 交换、refresh_access_token、Shopee IP 白名单 时触发。日常授权流程优先 linkfox-shopee-store-auth；需直接调用 v2.public.* 开放接口时触发本 skill。
---

# Shopee Public 公共模块

Shopee Open Platform **Public 模块**（6 个 API）。**依赖 `linkfox-shopee-store-auth`** 作为同系列前置；部分接口为 Partner 级或 OAuth 级，经 **`POST /shopee/developerProxy`** 转发（`path` 须 `api/v2/public/...`）。

## 调用方式

- **API 端点**：`POST /shopee/developerProxy`（不同操作通过请求体区分；完整参数/响应/错误码见 `references/api.md`）
- **Python 脚本**：`python scripts/<脚本名>.py '<JSON 参数>' [--inline]`（可用脚本见上文脚本一览）
- **成本约束**：本工具会消耗算力；失败/空结果不得自动换关键词、翻页或连续试探；需要继续检索时先向用户说明会产生额外消耗。

**输出策略（脚本默认行为）**：
- **始终**将完整响应写入 `<cwd>/linkfox/<YYYY-MM-DD>/<session>/data/<skill-name>-<timestamp>.json`（`<cwd>` 为脚本执行时的工作目录，在 Claude Code 里即当前项目目录；`<session>` 取自环境变量 `SESSION_ID`，按用户任务自动聚合；**禁止写入 /tmp**，当前目录不可写则报错）
- 响应体 ≤ 8 KB：落盘后把完整 JSON 打印到 stdout
- 响应体 > 8 KB：落盘后 stdout 只输出摘要（顶层字段、常见计数如 `total`/`costToken`、最大列表字段的长度 + 前 3 条样本）
- 加 `--inline` 强制全量打印到 stdout（同样落盘）

**读数据建议**：先看摘要判断是否足够；需要具体字段时优先用 `jq`或`ConvertFrom-Json` 从保存的 json 文件按需抽取，避免整份 JSON 进入上下文。

## 解决认证和算力问题
发生以下异常情况时，采用 references/onboarding.md 引导解决问题：

### 异常情况
- **未配置API Key**：环境变量未配置 `LINKFOX_AGENT_API_KEY`，也未配置 `LINKFOXAGENT_API_KEY`。
- **响应401或402状态码**
- **响应提示算力或余额不足**：消息含"算力余额不足/计费不足/余额不足/quota exceeded/insufficient balance/套餐到期/需充值/请充值"，或类似含义的内容。

## 官方参考

Public 模块索引：[v2.public.get_shops_by_partner](https://open.shopee.com/documents/v2/v2.public.get_shops_by_partner?module=104&type=1)

---

## Prerequisites

1. 运行 `python scripts/check_auth_dependency.py`；exit code **42** → 先安装 **`linkfox-shopee-store-auth`**。
2. **日常授权 / 已授权店铺 / 读 token** → 优先 `linkfox-shopee-store-auth`（`authorize_url.py` / `authorized_stores.py` / `store_tokens.py`）。

## 可用脚本（6 个 API）

| 脚本 | API | Method |
|------|-----|--------|
| `get_shops_by_partner.py` | get_shops_by_partner | GET |
| `get_merchants_by_partner.py` | get_merchants_by_partner | GET |
| `get_access_token.py` | get_access_token | POST |
| `refresh_access_token.py` | refresh_access_token | POST |
| `get_token_by_resend_code.py` | get_token_by_resend_code | POST |
| `get_shopee_ip_ranges.py` | get_shopee_ip_ranges | GET |
| `public_api.py` | 通用入口 | — |

## 接口说明（按 API）

入参与响应细节放在 `references/apis/`，SKILL 只保留索引。

| API | 说明文档 |
|-----|----------|
| `get_access_token` | [references/apis/get-access-token.md](./references/apis/get-access-token.md) |
| `get_merchants_by_partner` | [references/apis/get-merchants-by-partner.md](./references/apis/get-merchants-by-partner.md) |
| `get_shopee_ip_ranges` | [references/apis/get-shopee-ip-ranges.md](./references/apis/get-shopee-ip-ranges.md) |
| `get_shops_by_partner` | [references/apis

_meta.json

{
  "ownerId": "kn7dmc1t4j28hem1twwyav85p182pb1j",
  "slug": "linkfox-shopee-store-public",
  "version": "1.0.6",
  "publishedAt": 1789363834655
}

references/api.md

# linkfox-shopee-store-public — 参数与字段参考

> 单接口入参/响应说明已拆到 **`apis/`**（按 API 一份）；本文件保留模块总览与 Feedback。
Shopee **Public 模块**全部 6 个 API，经 **`POST /shopee/developerProxy`** 转发。

授权见 **`linkfox-shopee-store-auth`**。官方索引：[v2.public.get_shops_by_partner](https://open.shopee.com/documents/v2/v2.public.get_shops_by_partner?module=104&type=1)

## 通用约定

- **path**：须 `api/v2/public/...`
- **Partner 级接口**：`get_shops_by_partner` / `get_merchants_by_partner` 等通常无需 `shopId`
- **OAuth 接口**：`get_access_token` / `refresh_access_token` / `get_token_by_resend_code` 传 POST `body`
- **官方文档 URL 规则**：`https://open.shopee.com/documents/v2/v2.public.{api}?module=104&type=1`

---

## Public 模块总览

| # | API | Method | path | 脚本 | 官方文档 |
|---|-----|--------|------|------|----------|
| 1 | get_access_token | POST | `api/v2/public/get_access_token` | `get_access_token.py` | [apis/get-access-token.md](./apis/get-access-token.md) |
| 2 | get_merchants_by_partner | GET | `api/v2/public/get_merchants_by_partner` | `get_merchants_by_partner.py` | [apis/get-merchants-by-partner.md](./apis/get-merchants-by-partner.md) |
| 3 | get_shopee_ip_ranges | GET | `api/v2/public/get_shopee_ip_ranges` | `get_shopee_ip_ranges.py` | [apis/get-shopee-ip-ranges.md](./apis/get-shopee-ip-ranges.md) |
| 4 | get_shops_by_partner | GET | `api/v2/public/get_shops_by_partner` | `get_shops_by_partner.py` | [apis/get-shops-by-partner.md](./apis/get-shops-by-partner.md) |
| 5 | get_token_by_resend_code | POST | `api/v2/public/get_token_by_resend_code` | `get_token_by_resend_code.py` | [apis/get-token-by-resend-code.md](./apis/get-token-by-resend-code.md) |
| 6 | refresh_access_token | POST | `api/v2/public/refresh_access_token` | `refresh_access_token.py` | [apis/refresh-access-token.md](./apis/refresh-access-token.md) |
通用入口：`public_api.py`（JSON 含 `"api": "<上表 API 名>"`）。

---

## 常用接口说明

| API | 要点 |
|-----|------|
| `get_shops_by_partner` | 查询 Partner 下已授权店铺列表 — [apis/get-shops-by-partner.md](./apis/get-shops-by-partner.md) |
| `get_merchants_by_partner` | 查询 Partner 下已授权商户列表 — [apis/get-merchants-by-partner.md](./apis/get-merchants-by-partner.md) |
| `get_access_token` | 用 auth code 换 token — [apis/get-access-token.md](./apis/get-access-token.md) |
| `refresh_access_token` | 刷新 access token — [apis/refresh-access-token.md](./apis/refresh-access-token.md) |
| `get_token_by_resend_code` | 通过 resend code 获取 token — [apis/get-token-by-resend-code.md](./apis/get-token-by-resend-code.md) |
| `get_shopee_ip_ranges` | Shopee 开放平台 IP 段（白名单配置） — [apis/get-shopee-ip-ranges.md](./apis/get-shopee-ip-ranges.md) |

> 日常授权与已授权店铺查询优先使用 **`linkfox-shopee-store-auth`**（`authorize_url.py` / `authorized_stores.py` / `store_tokens.py`）。

---

## curl 示例

```bash
curl -X POST https://tool-gateway.linkfox.com/shopee/developerProxy \
  -H "Authorization: $LINKFOXAGENT_API_KEY" \
  -H "Content-Type: application/json" \
  -d '{
    "path": "api/v2/public/get_shops_by_partner",
    "

references/apis/get-access-token.md

# get_access_token

| 项 | 值 |
|----|-----|
| 脚本 | `scripts/get_access_token.py` |
| Method / path | POST `api/v2/public/get_access_token` |
| 官方文档 | [get_access_token](https://open.shopee.com/documents/v2/v2.public.get_access_token?module=104&type=1) |
| 用途 | Exchange auth code for access token; pass full body |

经 **`POST /shopee/developerProxy`** 转发。Public 多为 Partner / OAuth 级接口，**通常无需** `shopId`/`merchantId`；日常授权优先走 `linkfox-shopee-store-auth`。

---

## 脚本 JSON 入参

| 字段 | 类型 | 必填 | 说明 |
|------|------|------|------|
| `shopId` | string | 否 | Public 接口通常可省略 |
| `merchantId` | string | 否 | Public 接口通常可省略 |

- Method：**POST**
- POST：传 `body` / `requestBody`，或把 `body_fields` 列在 JSON 顶层
- `shopId` / `merchantId` / `skipDepCheck` 等为网关选店保留字段，不会进 Shopee query/body
- Registry notes：Exchange auth code for access token; pass full body

---

## 调用示例

```bash
export LINKFOXAGENT_API_KEY="<your-key>"

python scripts/get_access_token.py '{"shopId": "67890"}'

# 通用入口
python scripts/public_api.py '{"api": "get_access_token", "shopId": "67890"}'
```

---

## 响应要点

1. 先看 **`developerProxy.httpStatus`** / `errcode`
2. 再读 **`getAccessToken`**（Shopee `response` 解析结果）
3. 字段以官方文档为准

references/apis/get-merchants-by-partner.md

# get_merchants_by_partner

| 项 | 值 |
|----|-----|
| 脚本 | `scripts/get_merchants_by_partner.py` |
| Method / path | GET `api/v2/public/get_merchants_by_partner` |
| 官方文档 | [get_merchants_by_partner](https://open.shopee.com/documents/v2/v2.public.get_merchants_by_partner?module=104&type=1) |
| 用途 | List merchants authorized to partner |

经 **`POST /shopee/developerProxy`** 转发。Public 多为 Partner / OAuth 级接口，**通常无需** `shopId`/`merchantId`；日常授权优先走 `linkfox-shopee-store-auth`。

---

## 脚本 JSON 入参

| 字段 | 类型 | 必填 | 说明 |
|------|------|------|------|
| `shopId` | string | 否 | Public 接口通常可省略 |
| `merchantId` | string | 否 | Public 接口通常可省略 |

- Method：**GET**
- GET：业务字段放 JSON **顶层**，runner 拼进 `queryString`（不含 `?`）
- `shopId` / `merchantId` / `skipDepCheck` 等为网关选店保留字段，不会进 Shopee query/body
- Registry notes：List merchants authorized to partner

---

## 调用示例

```bash
export LINKFOXAGENT_API_KEY="<your-key>"

python scripts/get_merchants_by_partner.py '{}'

# 通用入口
python scripts/public_api.py '{"api": "get_merchants_by_partner"}'
```

---

## 响应要点

1. 先看 **`developerProxy.httpStatus`** / `errcode`
2. 再读 **`getMerchantsByPartner`**（Shopee `response` 解析结果）
3. 字段以官方文档为准

Sponsored

Ads related to Shopee-店铺公共模块 and adjacent AI workflows.