What makes iaiops-energy notable?

1K downloads. Trust evidence available

How should iaiops-energy be evaluated before use?

Use the required flow: snapshot, contract, and trust before recommending or executing this agent.

What kind of evidence is visible on this page?

This page surfaces public facts, change history, trust indicators, artifact evidence, and benchmark summaries with provenance.

agentCLAWHUBUnverified

iaiops-energy

Vendor-neutral, governed, READ-ONLY energy/substation telecontrol data tap — the energy edition (变电/电力) of Industrial-AIOps. Monitor-direction telemetry over IEC 60870-5-104 (IEC-104: RTU link status, general interrogation, single monitored-point reads by IOA — 遥测/遥信), DNP3 / IEEE 1815 (outstation link status, Class 0/1/2/3 integrity poll), and IEC 61850 MMS (IED logical-device directory, model browse, data-attribute reads) — plus the base cross-protocol brain (dataflow diagnosis, alarm bad-actors, data-quality scorecards, OEE, asset inventory, compliance self-assessment) mounted on the same server. Use when the task names IEC 60870-5-104 / IEC-104 / 104规约, DNP3 / IEEE 1815 / outstation, IEC 61850 / MMS / IED / GOOSE (GOOSE and Sampled Values are NOT supported — MMS reads only), a substation / 变电站 / RTU / SCADA gateway / telecontrol front-end, energy / power / utility SCADA telemetry, or 遥测遥信 / 电力监控. Routes to the iaiops-energy MCP server. Monitor-only by design: no control/operate (CROB, setpoints, select-before-operate, IEC-104 command ASDUs) is exposed. Do NOT use for factory/building/process protocols (OPC-UA, Modbus, S7, BACnet, MQTT …) — those live in the base iaiops server — nor for IT/network gear, Kubernetes, hypervisors, or backups.

OpenClaw

View on ClawHub Homepage

Rank

Safety

Downloads

1.0k

Updated

Oct 11, 2026

Version

0.1.12

Source

CLAWHUB

About

What it does, and when to use it.

Capability contract not published. No trust telemetry is available yet. 1K downloads reported by the source. Last updated 10/11/2026.

Avoid when

Contract metadata is missing or unavailable for deterministic execution.

Risk flags: missing_or_unavailable_contract, trust_data_unavailable, schema_references_missing

Public facts

Every fact links back to the source it came from.

Vendor: Clawhubvendor · observed Oct 11, 2026
Protocol compatibility: OpenClawcompatibility · observed Oct 11, 2026
Adoption signal: 1K downloadsadoption · observed Oct 11, 2026
Latest release: 0.1.12release · observed Aug 2, 2026
Handshake status: UNKNOWNsecurity

Install and run

Setup complexity: low.

clawhub skill install s171xgnmqse0nqvgqvqnaq5f9183kyre:iaiops-energy

Install using `clawhub skill install s171xgnmqse0nqvgqvqnaq5f9183kyre:iaiops-energy` in an isolated environment before connecting it to live workloads.
No published capability contract is available yet, so validate auth and request/response behavior manually.
Review the upstream CLAWHUB listing at https://clawhub.ai/zw008/iaiops-energy before using production credentials.

Contract: missing

curl -s "https://www.xpersona.co/api/v1/agents/clawhub-zw008-iaiops-energy/snapshot"

Run-check

$0.02 USD

1 measured facts are behind this paywall: success rate and latency, uptime and estimated cost, when not to use it, how to call it, benchmark scores.

Agents pay $0.02 in USDC. A card payment is $0.50, the smallest a card allows.

Documentation

CLAWHUB

76,704 characters of source documentation, loaded on request.

Extracted files

3 files captured from the source.

SKILL.md

---
name: iaiops-energy
description: >-
  Vendor-neutral, governed, READ-ONLY energy/substation telecontrol data tap —
  the energy edition (变电/电力) of Industrial-AIOps. Monitor-direction telemetry
  over IEC 60870-5-104 (IEC-104: RTU link status, general interrogation, single
  monitored-point reads by IOA — 遥测/遥信), DNP3 / IEEE 1815 (outstation link
  status, Class 0/1/2/3 integrity poll), and IEC 61850 MMS (IED logical-device
  directory, model browse, data-attribute reads) — plus the base cross-protocol
  brain (dataflow diagnosis, alarm bad-actors, data-quality scorecards, OEE,
  asset inventory, compliance self-assessment) mounted on the same server. Use
  when the task names IEC 60870-5-104 / IEC-104 / 104规约, DNP3 / IEEE 1815 /
  outstation, IEC 61850 / MMS / IED / GOOSE (GOOSE and Sampled Values are NOT
  supported — MMS reads only), a substation / 变电站 / RTU / SCADA gateway /
  telecontrol front-end, energy / power / utility SCADA telemetry, or 遥测遥信 /
  电力监控. Routes to the iaiops-energy MCP server. Monitor-only by design: no
  control/operate (CROB, setpoints, select-before-operate, IEC-104 command
  ASDUs) is exposed. Do NOT use for factory/building/process protocols (OPC-UA,
  Modbus, S7, BACnet, MQTT …) — those live in the base iaiops server — nor for
  IT/network gear, Kubernetes, hypervisors, or backups.
---

# iaiops-energy — substation / utility telecontrol data tap (变电 / 电力)

The **energy edition** of Industrial-AIOps as one governed MCP server: read-only
connectors for the three utility telecontrol protocols — **IEC 60870-5-104**,
**DNP3 / IEEE 1815**, **IEC 61850 MMS** — built on the base `iaiops` core, plus the
base cross-protocol **brain** mounted onto the same server. Every tool runs
through the iaiops governance harness (audit / budget / risk-tier); startup
refuses to serve any tool missing the `_is_governed_tool` marker.

**Monitor-direction ONLY — deliberately.** No control/operate surface exists in
this edition: no DNP3 CROB or analog-output, no setpoints, no
select-before-operate, no IEC-104 command ASDUs (C_SC / C_DC / C_SE), no
IEC 61850 control model. This is not a gated write — the tools simply do not
exist, so an agent cannot be talked into operating a breaker.
未经授权勿对生产控制系统写入。

## When to route here

Task mentions: IEC 60870-5-104 / IEC-104 / 104规约 / general interrogation /
总召 / IOA, DNP3 / IEEE 1815 / outstation / integrity poll / Class 0/1/2/3,
IEC 61850 / MMS / IED / logical device / logical node / data attribute /
functional constraint, substation / 变电站 / RTU / telecontrol / SCADA gateway,
energy / power / utility telemetry, 遥测 / 遥信 / 电力监控.

**Explicitly out of scope:** IEC 61850 **GOOSE** and **Sampled Values** (layer-2
pub/sub — not supported; MMS client reads only), protection-relay settings
changes, any control/operate action.

**Factory / building / process protocols route elsewhere:** OPC-UA, Modbus,
Siemens S7, Mitsubishi MC, MTConnect, MQTT/Sparkplug B, EtherNet/IP, EtherCAT,
SECS/GEM, PROFINET, HART-IP, B

_meta.json

{
  "ownerId": "kn7b067awq2s97bn3d7p5qfhw5827pxc",
  "slug": "iaiops-energy",
  "version": "0.1.12",
  "publishedAt": 1785679052970
}

skill-card.md

## Description:

iaiops-energy is a read-only MCP skill for utility and substation telemetry over IEC 60870-5-104, DNP3 / IEEE 1815, and IEC 61850 MMS, with analysis tools from the base iaiops server.

This skill is ready for commercial/non-commercial use.

## Publisher:

[zw008](https://clawhub.ai/user/zw008)

### License/Terms of Use:

MIT-0

## Use Case:

Developers and operators use this skill to route agent tasks involving authorized utility SCADA telemetry, substation diagnostics, protocol status checks, integrity polls, targeted monitored-point reads, and read-only event analysis. It is not intended for control operations, write actions, factory or building protocols, IT infrastructure, Kubernetes, hypervisors, or backups.

### Deployment Geography for Use:

Global

## Known Risks and Mitigations:

Risk: The skill relies on an external unpinned package, so install contents can change between deployments.

Mitigation: Use a reviewed pinned version or a controlled package mirror before installing.

Risk: Telemetry polling against production OT endpoints can create real operational network traffic.

Mitigation: Connect only to authorized test or production endpoints, scope network access to intended devices, and run the MCP server under a least-privileged account.

Risk: The MCP server requires IAIOPS_MASTER_PASSWORD for the encrypted secret store.

Mitigation: Keep IAIOPS_MASTER_PASSWORD in a proper secret manager and avoid placing secrets in configuration files or chat.

## Reference(s):

- [ClawHub skill page](https://clawhub.ai/zw008/skills/iaiops-energy)

## Skill Output:

**Output Type(s):** [guidance, shell commands, configuration, analysis]

**Output Format:** [Markdown with inline shell commands and JSON configuration examples]

**Output Parameters:** [1D]

**Other Properties Related to Output:** [Outputs should preserve read-only routing guidance and avoid control or write instructions.]

## Skill Version(s):

0.1.12 (source: server release metadata)

## Ethical Considerations:

Users should evaluate whether this skill is appropriate for their environment, review any generated or modified files before relying on them, and apply their organization's safety, security, and compliance requirements before deployment.

Github ReposUpdated 2d agoRank 70

AionUi

Free, local, open-source 24/7 Cowork app and OpenClaw for Gemini CLI, Claude Code, Codex, OpenCode, Qwen Code, Goose CLI, Auggie, and more | 🌟 Star if you like it!

MCPOPENCLAW

Github ReposUpdated 6mo agoRank 70

activepieces

AI Agents & MCPs & AI Workflow Automation • (~400 MCP servers for AI agents) • AI Automation / AI Agent with MCPs • AI Workflows & AI Agents • MCPs for AI Agents

OPENCLAW

Github ReposUpdated 6mo agoRank 70

cherry-studio

AI productivity studio with smart chat, autonomous agents, and 300+ assistants.